Description

Cutback bitumen MC-70

Cutback bitumen MC 70 producing way would be the same as other MC bitumen and it will make from high-quality Bitumen dissolved in kerosene solvents in Asia Bitumen solvent towers. the solvent of MC 70 would be kerosene and for a better quality of final product, the quality and solvent both of them must be with high quality and without any impurity.

Cutback Bitumen MC-70 uses

MC 70 or medium cure cutback bitumen is used for reducing or diluent the viscosity of Bitumen in road construction normally is spraying cutback asphalt MC 70 on the surface of the road Asphalt and its very good for first coating because it doesn’t need to make it heat.

cutback asphalt MC 70 is used for waterproofing surface cracks like cracks on the Asphalt in roads and in roofs of constructions it can use for waterproofing the surfaces of non Asphalt constructions.

the main uses of cutback asphalt MC 70 are used in the surface of places for increasing adhesion of surfaces before asphalting them or waterproofing these surfaces with Asphalt.

Cutback Bitumen MC-70 Packing

Packing of Cutback Asphalt would be normally bulk in tankers or with new steel or recondition thick drums with pallets.

Cutback Bitumen MC-70 Maintenance conditions

Cutback Asphalt MC 70 must handle and store in low-temperature conditions because its vapor would be flammable.

Cutback Bitumen MC-70 specification

Test on Residue from distillation testTest MethodSpecifications
Penetration 77°F (25°C) 100g,5s mmASTM D5120 – 300
Flashpoint(tag open cup), °CASTM D314338 min
Ductility 77°F (25°C) 5cm/min cmASTM D113100
Solubility in trichloroethyleneASTM D204299
Water, percent volumeASTM D950.2 MAX
Viscosity at 140°F (60°C)ASTM D217030 – 120
Kinematic viscosity at 60°c, CSTASTM D217070 – 140

Distillation test
The distillate, volume percent of total Distillate to 680°F (360°C)

to 437°F (225°C)
To 500°F (260°C)
to 600°F (316°C)
Residue from distillation to
680°F(360°C), percent volume by difference

20 

ASTM D402

 

10

70

65

93

55